The Evolution of X86

How to install MAC OS X on AMD Processor

MAC OS X installation for AMD Processor using iATKOS S3 V2 on Virtual Box

This video will help you setup your very first MAC OS X Snow Leopard on your Windows PC. It's so easy to set this up but installation on AMD processor is pretty much troublesome. 

NOTE: iAtkos L2 was use on this video


Got this customization from this insanelymac.com

NOTE: THIS INSTALLATION IS FOR INTEL PROCESSOR (AMD INSTALLATION IN GREEN) :

This is for MAC customization. 

In the Installer Customize menu, select the options shown in RED here:

-
 iATKOS S3 V2 Main System [Pre-selected Default]

- Bootloader

-
 AsereBLN v1.19 [Default] <--
KEEP DEFAULTS ALL THE TIME 

KEEP DEFAULTS ALWAYS

- PC_EFI v10.6

- Slice

- AnVAL Loader

- Chameleon v2 RC5

- Chameleon v2 RC4

- Bootloader Options 


- 32-bit boot <-- YOU CAN ALWAYS TRY THIS OUT, IF EVERYTHING FAILS - UNCHECK FROM CUSTOMIZATION. IN MY AMD I DISABLE THIS ONE.

- Graphics Enabler <-- YOU CAN ALWAYS TRY THIS OUT, IF EVERYTHING FAILS - UNCHECK FROM CUSTOMIZATION


"You can choose to use Graphics_Enabler (BUT ONLY if you have a nVidia graphics card.......)"

- -pci1 

"If you normally have problems using Graphics Enabler, you may need to select this option too"
- Ethernet

- USB (USBBusFix; EHCIacquire; UHCIreset)

- Quiet Boot

- Legacy Logo

- UUID [Selecting this breaks HDD multiboot options]

- Patches


- /Extra directory [Default]

-
 fakesmc [Default] V2.5 [MUST BE SELECTED]


- Disabler [Default]

RTC (RTC [Default]RTC(32bit)) [RTC(Default) is a 64bit kext] <-- KEEP THE DEFAULTS


- Modified Kernels (qoopz 10.3.0; qoopz 10.2.0; PCJ kernel; Atom Kernel)  
<-- NEVER FORGET TO CHOOSE A KERNEL (QOOPZ) FOR AMD USERS


-
 EVO Reboot [Default] 


- Sleep Enabler

- USB

- UUID

- Drivers

- Main Hardware
 


SATA/IDE <-- ALWAYS CHOOSE THIS WHETHER YOU'RE USING AMD or INTEL PROCESSOR

(AHCI SATA; Intel SATA/IDE; JMicron SATA/IDE; VIA SATA/IDE (support for VIA, SiS, SI, ULI, Marvell and some nForce chipsets); nForce SATA/IDE) <-- I DIDN'T TRY THIS BUT YOU CAN ALWAYS TRY, UNCHECK IF EVERYTHING FAILS

- Sound (Voodoo HDA [Default]; Apple HDA 10.6.2 [Default])

Initially choose both Voodoo HDA and Apple HDA 10.6.2 options, ESPECIALLY if you are not sure which available option(s) for your audio chipset/codec to choose,........this should give you sound during the initial setting up via the OS X Welcome screen.........

If you are using a Legacy Audio kext with a patched DSDT.aml file in / or in /Extra, you can delete VoodooHDA.kext from /System/Library/Extensions/, and MUST also rename theAppleHDA.kext in /S/L/E/ as follows:

sudo mv /System/Library/Extensions/AppleHDA.kext sudo mv /System/Library/Extensions/AppleHDA.kext.orig

leaving the AppleHDA1062.kext untouched, or if the version 0.2.61 VoodooHDA.kext works best for your chipset/codec (check entry in About This Mac &gt; System Profiler &gt; Audio (Built In), then delete the AppleHDA1062.kext instead......"

"If you have a AD19988b audio chipset/codec, then you will need to follow the audio fixing procedure using a Legacy Audio kext with a patched DSDT.aml file as described in  post #2here......." 

- PS/2 (Apple PS/2; Voodoo PS/2)

"One of the PS2 options is needed ONLY if you are using a PS/2 keyboard and/or PS/2 mouse......"

CPU Power Management (Voodoo P-State; Voodoo Power; EvO Speedstep)

- Laptop Hardware (Battery; Card Reader; TSC Sync; ACPI Thermal (32bit)

-
 NTFS-3G (Mac FUSE Core; NTFS-3G [automatic sub-selection])
<-- AMD USERS DON'T NEED TO SELECT THIS.

- DO NOT CHANGE ANYTHING -

- VGA

- nVidia

- EFI String (DVI/DVI; DVI/VGA; VGA/DVI)

- Enablers (NVEnabler; Natit)

- ATI

- Enablers (EVO enabler; ATY-Init (32bit)

- ATI 48xx

- ATI Framebuffer

- Intel

- EFI String

- Natit (32bit)

- GMA 950 (GMA 950 27A2 (32bit); GMA 950 27AE (32bit))

- GMA X3100 (Framebuffer (32bit)


"UNLESS you have one of the ATI or Intel graphics cards using a driver in the list of options.......

OR if you have a nVidia graphics card BUT have not chosen Graphics Enabler in Bootloader Options; in which case, choose an appropriate nVidia EFI String option OR Enabler option above."

NOTE: I have found that both Graphics_Enabler and NVEnabler work with my GeForce 8600GT 256MB graphics card giving CI/QE (as seen from the transparent top menu bar) but Graphics_Enabler works more cleanly during bootup, as the bootup screen shows...... 

- Network

- Wireless

- Atheros

- Atheros Corei7 fix

- Broadcom

- Ralink (RT257x; RT2500 (32bit); RT2870; RT2860 (32bit); RT256x (32bit))
- Realtek (RTL8187 (32bit); RTL8187B (32bit); RTL8187L (32bit); RTL8187SE (32bit))


- Zydas (32bit)
Wired


- Realtek (RTL8168; RTL8139)

- Marvell (Yukon 88E8001; Yukon 88E8056)

- Atheros (Attansic L1; Attansic L1E; Attansic L2 (32bit)

- Intel (Intel Pro V100; Intel Gigabit)

- Broadcom (BCM440x; BCM5755M (32bit); BCM5787M (32bit))

-
 nForce


- Via Rhine (32bit)

"Choose nForce unless you know exactly which of the listed drivers your MOBO onboard LAN chipset requires........if your chipset is not listed, then choose NONE......., or if you are using a wireless network connection/device, then choose accordingly from the Wireless options above"

----------


Once installed, you will be asked to reboot the machine. If you encounter some problems hit F8 white on boot then type -v -x -f before you hit enter.


Download iAtkos S3V2
Download iAtkos L2
Download Virtual Box

X86 ANDROID PC

I.AM.JOHN

Android Developers Blog

Powered by: X86 | I am John

Subscribe in a reader Back to TOP